The VECTOR/Cn class machines are versatile, fast, simple and precise “point-to-point” upper vertical DRILLING MACHINES, with longitudinal introduction and translation of the panel, which can be used both in line and stand-alone.Available in single or double drilling head versions, they are characterised by a configurable vacuum system with a completely innovative self-aligning “single” or “double” suction cup used to grip and move the panel to be machined along the X axis.
When properly programmed, the VECTOR/Cn performs: upper vertical drilling, horizontal drilling on all four sides, linear grooves and upper interpolated milling. The processes can be performed on panels with a maximum length of potentially infinite, minimum of 300 mm; maximum width up to 1200 mm and minimum of 120 mm; maximum thickness up to 60 mm and minimum of 12 mm.
Upon request, it can be configured to allow the insertion of hardware.
The machine has a monolithic structure in sheet metal and high-thickness electro-welded steel tubes. For programming and the human-machine interface, a PC with a Windows operating environment is used, connected to the ALBATROS-TPA model numerical control, which controls the machine's 4 or 6 axes depending on the number of drilling heads it comprises.
The following options apply:
Double-exit horizontal drilling heads for panel head and tail drilling
Double-exit horizontal drilling heads for drilling on the longitudinal sides of the panel
Independent high-frequency units for milling and grooving operations that can be combined with a magazine for automatic tool change
Groups dedicated to the inclusion of "hardware".
Wooden “pin” insertion group
Rear lower drilling unit (Vector-Modulo/Cn version)
The sliding and working plane of the machine is made up as follows:
Machine entry (loading) and exit (unloading) with support surfaces and panel sliding made of motorized rollers covered in PVC.
Work area, consisting of a support surface and sliding panel made of idle rollers covered in rectified PVC
