The SawStop® 10" Professional Cabinet Saw provides superior performance to meet the demands of discerning craftsmen and woodworkers. With SawStop™s legendary safety system, ground breaking dust collection and flawless fit and finish it™s ready to help you get the job done.
Now the Professional Cabinet Saw is available in a 1.75HP motor configuration. Plug in anywhere with 110 volt convenience!
SPECIFICATIONS:
Motor: (all 60Hz, TEFC):
1.75 or 3 hp available
Cabinet footprint:
19 3/8" w x 19 3/8" d
Cast iron table:
20" w x 27" d
Cast iron table (w/ extension wings):
44" w x 27" d
Extension wings:
12" w x 27" d each
Extension table 30 in rails:
12" w x 27" d
Extension table 36 in rails:
23 3/4" w x 27" d
Extension table 52 in rails:
40 1/8" w x 27" d
Weights - table saw only:
317 lb (1.75 hp), 335 lbs (3 hp)
Weights - w/ 30 in fence systems:
367 lb (1.75 hp), 380 lbs (3 hp)
Weights - w/ 36 in fence systems:
408 lb (1.75 hp), 426 lbs (3 hp)
Weights - w/ 52 in fence systems:
431 lb (1.75 hp), 449 lbs (3 hp)
Weights - (optional cast iron wings):
N/A
Shipping weight (approx.):
390 lb (table saw only)
Blade:
40-tooth, 5/8" arbor
Blade diameter:
10"
Blade tilt:
Left
Blade kerf:
0.118" (3mm)
Blade plate thickness:
0.078" (2mm)
Max. depth of cut, blade at 0º:
3 1/8"
Max. depth of cut, blade at 45º:
2 1/4"
Max. rip, right of blade - 30 in:
30" (w/ 30" rails)
Max. rip, right of blade - 36 in:
36" (w/ 36" rails)
Max. rip, right of blade - 52 in:
52" (w/ 52" rails)
Max. rip, left of blade:
12"
Max. rip, left of blade (options):
N/A
Dado diameter:
8" (requires 8R2 brake, dado insert)
Dado max. width:
13/16"
Arbor diameter at blade:
5/8"
Main bearing size:
62mm OD x 30mm ID
Second bearing size:
52mm OD x 25mm ID
Table in front of blade (max. elevation):
10 1/4"
Table behind blade (max. elevation):
7 1/2"
Arbor Runout:
0.001" Maximum allowable runout
Table flatness measured diagonally:
0.010" Maximum gap
Blade alignment with miter slot:
0.010" Maximum displacement
Deviation of miter gauge indexing stops from actual:
±0.25º
Alignment between splitter and blade:
0.010" Maximum difference
Miter slots T-shaped:
3/4" at top, 1" at bottom, 3/8" deep
Miter slots center:
11 1/8" center-to-center
Miter slots info:
5 1/2" (arbor flange to center of right slot)
Dust collection port diameter:
4"
Riving knife / splitter thickness:
0.090" (2.3 mm)
Blade guard (dust collection):
polycarbonate, extends 1 3/16" right of blade (3HP)
